C-DT50-GD1 single hole single pass 50 square
  • Air ProC-DT50-GD1 single hole single pass 50 square
  • Air ProC-DT50-GD1 single hole single pass 50 square

C-DT50-GD1 single hole single pass 50 square

WoSign is a professional manufacturer of C-DT50-GD1 single hole single pass 50 square. C-DT50-GD1 single hole single pass 50 square has passed series of security tests of the national authorities and have been recognized.

మోడల్:C-DT50-GD1

విచారణ పంపండి

ఉత్పత్తి వివరణ


C-DT50-GD1 single hole single pass 50 square Rail Terminals


Rail terminals are developed for many pain points of Rail terminals.Aiming to solve the problem of fracturing pipes and wires and poor crimping due to irregularly old crimping method, which also caused some drawbacks like unreliable connection and high temperature rise. In addition, there is a potential safety hazard when terminals are connected with rails. It is easy to fracture wires and lead to the electric leakage, if terminals are affected by shocking or dropped from high altitude that strike on stones.

This series of pressure-free self-locking connectors are equipped with springs which play a role of shockproof, keeping away from the interface can increase the stability and safety of the connection. The purpose of the wire entrance is horn-shaped to facilitate the access to the wire and the installation. It has the characteristics of low contact surface resistance and low temperature rise as well. in addition,it can  be used in irregular While crimping, the reliability of the connection is guaranteed.

1.At the same time, our company has added a series of silicone sleeves for high-current maintenance in C-DT50-GD1 single hole single pass 50 square Rail terminals.In order to avoid any safety hazards, our company added silicone sleeves on this type of terminals if it is adopted on large current maintenance.

Advantages of C-DT50-GD1 single hole single pass 50 square:

Low temperature rise: The contact area increases, the contact resistance decreases, and the temperature rise is low.
No insulation tape: Press the old terminal to connect to the connection point and then wrap it with insulating tape.There are some safety risks that it is easily to aging and fall off after time passes. making it difficult to play the role of waterproof and anti-corrosion. There are security risks
Hydraulic clamp-free: Old-fashioned terminals have to be crimped with hydraulic clamps. not only expensive and heavy, but also inconvenient for carrying
Quick connection: No need to crimp and no need to wrap insulation tape. Additionally, it is also time-saving and efficiency that connection time of terminals only takes a fifth of time than before.
Save wires: the stripping length is about 1/3-1/2 of the old connection method.
Shock absorption and shock resistance: In the process of maintenance, it can resist the shock caused by vibration and overcome the situation of wire fracture caused by vertical fall, so as to guarantee the personal safety of maintainers.
Shell protection:It waterproof, acid resistant, anti-oxidation, anti-corrosion,and V1 flame retardant.

Remarks: Can be customized according to Customers’ needs

Remarks: can be customized according to the model required by the customer

Rail transit connection product parameters (with stainless steel outer spring) Dimensions unit: mm


Product number
Adapt to wire specifications
Stripping length
Total length A
Outer diameter B
Bore C
Width D
Thickness E
Hole diameter F
Hole distance G
C-DT25-GD1
25mm²Stranded wire
32
168
¢23.0
¢10.8
29.5
3.5
16.5

C-DT25-GD2
25mm²Stranded wire
32
180
¢23.0
¢10.8
23.5
3.5
10.5
23.0
C-DT35-GD1
35mm²Stranded wire
32
168
¢23.0
¢11.8
29.5
3.5
16.5

C-DT35-GD2
35mm²Stranded wire
32
180
¢23.0
¢11.8
23.5
3.5
10.5
23.0
C-DT50-GD1
50mm²Stranded wire
40
175
¢25.5
¢14.8
32.0
4.0
16.5

C-DT50-GD2
50mm²Stranded wire
40
190
¢25.5
¢14.8
27.0
4.0
10.5
23.0
C-DT70-GD1
70mm²Stranded wire
44
179
¢29.4
¢16.
34.0
5.0
16.5

C-DT70-GD2
70mm²Stranded wire
44
193
¢29.4
¢16.
29.0
5.0
10.5
23.0


Rail transit connection product parameters (with transparent silicone sheath) Dimensions unit: mm


Product number
Adapt to wire specifications
Stripping length
Total length A
Outer diameter B
Bore C
Width D
Thickness E
Hole diameter F
Hole distance G
Impulse withstand voltage
Flame retardant rating
C-DT25-GD1
25mm²Stranded wire
32
168
¢23.0
¢10.8
29.5
3.5
16.5

40KV
V1
C-DT25-GD2
25mm²Stranded wire
32
180
¢23.0
¢10.8
23.5
3.5
10.5
23.0
40KV
V1
C-DT35-GD1
35mm²Stranded wire
32
168
¢23.0
¢11.8
29.5
3.5
16.5

40KV
V1
C-DT35-GD2
35mm²Stranded wire
32
180
¢23.0
¢11.8
23.5
3.5
10.5
23.0
40KV
V1
C-DT50-GD1
50mm²Stranded wire
40
175
¢25.5
¢14.8
32.0
4.0
16.5

40KV
V1
C-DT50-GD2
50mm²Stranded wire
40
190
¢25.5
¢14.8
27.0
4.0
10.5
23.0
40KV
V1
C-DT70-GD1
70mm²Stranded wire
44
179
¢29.4
¢16.
34.0
5.0
16.5

40KV
V1
C-DT70-GD2
70mm²Stranded wire
44
193
¢29.4
¢16.
29.0
5.0
10.5
23.0
40KV
V1


హాట్ టాగ్లు: C-DT50-GD1 single hole single pass 50 square, Manufacturers, Suppliers, Factory, Customized, China, Made in China, FOB Shenzhen, Discount, Price, Price List, Quotation, CE, Newest, Quality, Advanced, Durable, 5 Years Warranty, Classy, Patented, Innovation

సంబంధిత వర్గం

విచారణ పంపండి

దయచేసి మీ విచారణను క్రింది రూపంలో ఇవ్వడానికి సంకోచించకండి. మేము మీకు 24 గంటల్లో ప్రత్యుత్తరం ఇస్తాము.
验证码,看不清楚?请点击刷新验证码